StopTech recognizes that great brakes need to look as good as they perform. Performance wheels and tires are best complemented with StopTech Sport Rotors. StopTech slotted brake rotors prevent glazing of the pads, add bite and improve wet and dry braking performance.
Every StopTech Sport Rotor is produced from a high quality Centric Parts blank casting and finished in a durable e-coating for corrosion resistance.
Power Alloy metallurgy is an exclusive feature of many StopTech rotors. In specific vehicle applications, StopTech works with foundry partners to increase the molybdenum or carbon content of the castings, and to carefully control the cooling rate during production to reach targets for hardness and tensile strength.
Please note: When replacing this type of rotor you will need new grease seals and it is strongly recommended to install with new wheel bearings.
- Engineered performance rotors
- Superior resistance to cracking due to thermal stress
- Increased molybdenum (higher carbon)content that extends reliability and service life
- Includes left and right rotors
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
- Installation Difficulty:
- Moderate
- Tools Required:
- Basic Shop Tools
- Estimated Install Time:
- (approx.) 3 Hours
- Vehicle Fitment:
- 1987, 1988, 1989, 1990, 1991, 1992, 1993
- Vehicle Trim:
- LX
- Vehicle Trim:
- GT
- Vehicle Trim:
- L
- Vehicle Trim:
- GL
- Vehicle Trim:
- GLX
- Vehicle Trim:
- SVO
- Vehicle Trim:
- Cobra
- Brake Position:
- Front
