Steeda's 304SS Resonator Delete X-Pipe for your 2015-2024 5.0L, Coyote powered S550/S650 Ford Mustang GT is the best way to improve sound and increase performance at minimal cost, all while losing up to 7 pounds of weight. The X design, with its smooth transition, creates more scavenging effect than traditional H designs for increased power at high RPMs and a race inspired exhaust note. Unlike most versions on the market, this X-pipe allows you to retain the factory heat shield found on 2018 and newer GT models without cutting and expanding the X-pipe to retain the OE shields or chiseling off the OE shields. With mandrel bent 2.5"diameter tubing, the X-pipe easily installs between the factory catalytic converters and the factory mufflers. It is also compatible with virtually all aftermarket axle back exhaust kits. The T-304 stainless steel mandrel bent tubing will not develop surface rust typical with 409 stainless or rust completely through like aluminized mild steel. The flush fit exhaust clamps allow for shortening of the X-pipe if needed and prevent exhaust leaks common with expanded end kits.
NOTE : Cutting of the OE exhaust pipes is required for all resonator deletes on the market.
- Up to +8 hp
- Up to +9.5 lb/ft of torque
- X-pipe design improves exhaust flow over factory resonator and H-pipe design up to 20%
- 304SS will not rust like inferior 409SS or aluminized steel pipes
- Aggressive race inspired exhaust tone
- Sheds up to 7 lbs weight
- Does not require tune
- 32" overall length
- Band clamps allow cut to shorter length
- Retains 2018+ factory exhaust heatshields
- Band clamps allow for reinstall of factory resonator
- Fits GT, Bullitt, Mach 1, and Dark Horse Mustangs
X-Pipe vs H-Pipe: Which Is For You?
WARNING: California Residents: Cancer and Reproductive Harm; www.p65warnings.ca.gov
- Installation Difficulty:
- Easy
- Tools Required:
- 3/8" Ratchet, 14mm Socket, 15mm Socket, 14mm Wrench, 15mm Wrench, Reciprocating saw, Jack, Jack stands, Safety glasses, Gloves
- Estimated Install Time:
- (approx.) 1.5 Hours
- Vehicle Fitment:
- 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
- Vehicle Trim:
- GT
- Vehicle Trim:
- Mach 1
- Vehicle Trim:
- Dark Horse
-
Mustang H-Pipe or X-Pipe: Which Would You Choose For Your S550?
https://www.steeda.com/2015-2019-mustang-exhaust Stainless Res...
-
2021 Mustang: Stock Exhaust vs. Steeda X-Pipe & H-Pipe on the Dyno!
One of the most cost-effective ways to bring out the sound in ...
-
2024 Mustang GT: X-Pipe vs H-Pipe on the Dyno! Not The Results We Expected...
We've done this test on a 2021 Mustang GT in the past, but wit...