Stiffest Sway Bar on the market, massive One-and-a-half inch diameter (38mm)!
Steeda has the track-proven sway bars that will give you reduced body roll, adjustability, and the best handling of
any sway bar out on the market.
Our press-fit welded billet ends are far stronger than stamping the end of
the bar. Billet machining construction of the sway bar ends makes for far greater strength for a bulletproof sway
bar.
Don't settle for sway bars that are not track-tested and made by companies who do not specialize in
Mustangs. Steeda engineers, races, and wins with what it sells; order the best package for your daily-driven or
track-driven 2015+ Mustang today!
- These parts are less prone to cracking/fatigue failure on the ends themselves.
- It also reduces unwanted deflection in the sway bar end. Excess deflection creates unwanted geometry changes, which physically changes your sway bar stiffness to a non-ideal rate.
- With less unwanted deflection, our bars will 'wear out' slower - any spring will eventually become softer over time as it is cycled through its life, our bars will maintain their designed rate for longer with less unwanted deflection.
Our bar rates are developed and optimized through advanced vehicle dynamic simulation and through extensive real-world testing. We engineered these bars to control the vehicles' roll stiffness properly while still allowing you to run softer springs. This optimizes your overall grip and balance of the vehicle while still allowing you to maintain exceptional ride quality.
- MASSIVE 1.5" (One and a half inch / 38mm) diameter
- A true 1.5 inch / 38mm bar, unlike smaller bars from competitors marketed as 1.5 inch
- Improved handling, more stable cornering
- Reduced body roll
- Stiffest Sway Bar on the market
- Competition and street-proven
- Four adjustment positions from soft to firm
- Billet aluminum sway bar mounts
- Designed and manufactured in-house in the USA by Steeda
- Limited Lifetime Warranty
Note: Also fits the 2020-2023 GT500.
Note: Front Sway bar will fit vehicles equipped with MagneRide Suspension but cannot be used at softest setting due to contact with factory ride height sensor.
WARNING: California Residents: Cancer and Reproductive Harm; www.p65warnings.ca.gov
- Installation Difficulty:
- Hard
- Tools Required:
- Basic Shop Tools
- Estimated Install Time:
- (approx.) 2 Hours
- Vehicle Fitment:
- 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
- Vehicle Trim:
- V6
- Vehicle Trim:
- GT
- Vehicle Trim:
- EcoBoost
- Vehicle Trim:
- GT350
- Vehicle Trim:
- GT500
- Vehicle Trim:
- Bullitt
- Sway Bar Position:
- Front
- Front Diameter:
- 1.5
- Origin:
- Made in the USA