null

Steeda's Black Friday Sale: UP TO 55% OFF!

Steeda Autosports

Steeda Mustang Billet Steering Rack Bushings - 0.25" Offset (1985-2004)

SKU:
 555 4013
 | 
MPN:
 555-4013
$59.95
Was: $49.95
Now: Sale: $42.46
( saved $17.49 )
Sale
Made in the USA

In Stock - Less than 5 available


Typically ships in 1-3 business days.
Buy Now

Steeda Aluminum Rack bushings adjust both Ackerman angle and bumpsteer geometry, for better steering response, quicker corner-entry turn-in and more stability. The aluminum bushings replace the factory rubber bushings that mount the steering rack to the front crossmember. By eliminating deflection in the rubber mount, steering response is quicker and more precise. The reversible flange design can be installed two different ways, giving the installer the choice of maintaining factory Ackerman geometry or increasing Ackerman to quicken turn-in and reduce tire scrub in sharp corners. The offset bolt hole in the bushing moves the steering rack up on the crossmember to correct bumpsteer geometry on cars with modified suspensions such as increased caster, X2 balljoints, aftermarket K-members, or other modifications.

Two different offset heights are available to suit different applications. A. 25" offset fits all Mustangs from 1985 to 2004. A. 400" offset is also available for cars requiring larger corrections. The. 400" offset fits 1985 to 1995, and will also fit 96-04 applications but may cause interference between the steering rack and the 4.6L oil pan on some cars.

Modified suspensions requiring large adjustments with a bumpsteer kit will still benefit from using the offset rack bushings because they will reduce the number of spacers required on the bumpsteer kit. A shorter stack of spacers reduces deflection of the bumpsteer stud, increasing steering precision. For optimum performance bumpsteer should be checked and adjusted with a bumpsteer kit (adjustable height outer tie rod) after offset rack bushings are installed.


Note: These Steering rack bushings are not compatible with aftermarket k-members.

Product Benefits
  • High quality billet aluminum construction

warningWARNING: California Residents: Cancer and Reproductive Harm; www.p65warnings.ca.gov

×
Installation Difficulty:
Tech Recommended
Tools Required:
Basic Shop Tools
Estimated Install Time:
(approx.) 2 Hours
Vehicle Fitment:
1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Vehicle Trim:
V6
Vehicle Trim:
GT
Vehicle Trim:
Cobra
Vehicle Trim:
LX
Origin:
Made in the USA
  • Free Ground Shipping

  • Enthusiast-Driven Customer Service

  • Over 35 Years in Business