Ridetech Short-Long Arm (SLA) suspension increases the grip, performance, and handling of your Fox Body and brings it to modern times. It works by replacing the MacPherson strut design that comes stock on your Mustang. The two arms improve the suspension geometry and the contact patch of the tire throughout the suspensions travel.
Optimized suspension and performance. Caster, roll center, Ackerman angles, and negative camber gain have all been optimized for peak performance and handling, whether on the street or the track. The control arm design also offers improved tire clearance and steering angle, giving you the ability to run wider wheels and tires.
Versatile kit.With this SLA package, you can fit S550 Mustang calipers or SN95 calipers for better braking performance. This version fits the stock K-member, but another version is available to fit aftermarket K-members.
- Negative camber gain - 1.25deg./in
- Positive caster - 7-9deg.
- Bump steer - under 0.5in
- Lowers ride height 2in
- 50lbs lighter than stock suspension
- Stock track width
- Designed for factory k-members, aftermarket k-members should see part:
- 17" minimum wheel diameter
- Fits stock and most aftermarket sway bars
- Replaces OE MacPherson suspension with double-wishbone design for greater performance
- Optimized caster, roll-center, bumpsteer, and Ackerman angles
- Bolt-in frame surrounds offer secure mounting, maximum strength, and reduced NVH
- Spindles include Moog S550 Mustang rear hubs for strength, consistent braking, and reduced maintenance
- Improves tire clearance and steering angle - 30° with 275mm wide tire
- Uses S550 or SN95 Mustang brake systems
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
- Installation Difficulty:
- Tech Recommended
- Tools Required:
- Basic Shop Tools
- Estimated Install Time:
- 0
- Vehicle Fitment:
- 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993
- Vehicle Trim:
- LX
- Vehicle Trim:
- GT
- Vehicle Trim:
- Cobra
