Lower your 2005-2014 Mustang GT 1.5" on all 4 corners and improve the stance and handling with this Ford Racing Lowering "K" Springs Kit.
The progressive spring rates will reduce body roll on corners, reduce squat on acceleration, and excessive nose dive during hard braking.
The Ford Racing K-Springs not only improve the handling of your Mustang, but they also improve the overall appearance by lowering the ride height approximately 1.5" to eliminate that large wheel gap for a more aggressive muscle car stance.
When lowering you Mustang approximately 1.5" it is strongly recommended to install an adjustable panhard bar to correct the rear differential geometry, and a bump steer kit for the front. We have everything you need to improve your Mustang's handling for the street and the track.
For maximum handling, we recommend combining our Steeda X5 ball joint s with our bumpsteer kit.
The springs are also a great match for our Pro-action shocks and struts for 2005-2010 here and 2011-2014 here
- Front: 228 lb/in.
- Rear: 199.5 lb/in.
- Fits Mustang Boss (12-13)
- Fits Mustang Bullitt (08-09)
- Improves handling
- Aggressive lower stance
- Progressive spring rate
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
- Installation Difficulty:
- Moderate
- Tools Required:
- Basic Shop Tools
- Estimated Install Time:
- (approx.) 4 Hours
- Vehicle Fitment:
- 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
- Vehicle Trim:
- V6
- Vehicle Trim:
- GT
- Vehicle Trim:
- GT500
- Vehicle Trim:
- Boss 302
- Vehicle Trim:
- Bullitt
- Front Drop:
- 0.5
- Rear Drop:
- 1.4
- Drop Range:
- 0.25-0.9
