The Edelbrock Rollin' Thunder camshafts bring great performance improvements and good driveability to your 5.0L Fox Body. The cams offer a nice lope at idle and a noticeable bump in performance.
Maintain driveability and get great performance. The Rollin' Thunder camshaft gives your Fox Body impressive improvements, producing optimum torque from the low-end to mid-rpm range. The throttle response of the engine is greatly improved, meaning your Mustang will be ready for action at all times. Best driveability is achieved with a manual transmission, it is recommended that automatic transmissions upgrade to a high stall torque converter.
A perfect combination with other Edelbrock components. Edelbrock parts work together perfectly to deliver nice gains. When paired with the Performer intake manifold and the Performer cylinder heads, the camshaft can offer 300hp and 325ft-lbs of torque.
Product Benefits:
- 50-state legal
- CARB EO Number: D-215-14
- Lumpy idle
- Great performance improvements
- Intake Duration: 220 Degrees
- Exhaust Duration: 220 Degrees
- Intake Lift: 0.498"
- Exhaust Lift: 0.498"
- 110 Degree lobe separation
*Note: Upgraded valve springs are required. Do not use late model timing chain and gear set.
WARNING: California Residents: Cancer and Reproductive Harm; www.p65warnings.ca.gov
- Installation Difficulty:
- Tech Recommended
- Tools Required:
- Basic Shop Tools
- Estimated Install Time:
- (approx.) 8 Hours
- Vehicle Fitment:
- 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995
This aftermarket part has been granted an Executive Order (E.O.) and is approved for sale and use on motor vehicles by the California Air Resources Board (C.A.R.B.). In addition to California, this part is also legal in those states having adopted California clean air standards.