Steeda's X24 ball joints are a longer, stronger ball joint designed to raise the front roll center of your Mustang which becomes lower as a result of lowering the vehicle with springs or an adjustable ride height system.
Raising the roll center eliminates the issues associated with the lower roll center which include reduced cornering grip, increased body roll, and increased understeer.
Our X24 ball joints will improve handling by reducing body roll and improving the front tire contact patch without increasing spring rate or roll bar rate. You will experience improved steering response and higher overall front cornering grip with reduced understeer as a result.
Steeda ball joints are made from high strength steel and case hardened to meet and exceed OEM strength and durability standards. All internal housing parts are made from low-friction Nylon to preserve factory steering feel and feedback. Strength testing showed tensile strength to be nearly four times as strong as the OE ball joints.
Designed to fit all 2024 and up S650 Mustang models. These ball joints come with all necessary hardware and are greaseable unlike the OE ball joint.
Note: 18" wheels are required for clearance. When using these ball joints, which relocate the outer control arm pivot point, a bump steer kit must be used due to the changes in geometry between the control arm and the tie rod ends which increases bump steer. Check out our bump steer kit here.
- Replaces lower lateral link ball joints
- Raises front roll center for improved handling
- Reduces body roll
- Reduces understeer
- All necessary hardware included
- Greaseable
- Exceeds O.E. ball joint strength and durability
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
- Installation Difficulty:
- Tech Recommended
- Tools Required:
- Basic Shop Tools, Shop Press
- Estimated Install Time:
- (approx.) 2 Hours
- Vehicle Fitment:
- 2024, 2025, 2026
- Vehicle Trim:
- EcoBoost
- Vehicle Trim:
- GT
- Vehicle Trim:
- Dark Horse
