Enhance your Mustang engine compartment with this stylish battery hold down. Made from billet aluminum, this part comes complete with all mounting hardware.
[Learn More About This Product]
Dress up your engine bay with this stylish Oil Cap Cover. Made from Lightweight Billet Alum, this part was designed specifically for the S197 Mustang. Comes in a variety of finishes.
[Learn More About This Product]
Dress up your engine bay with this stylish Radiator Cap Cover. Made from Lightweight Billet Aluminum, this part was designed specifically for the S197 Mustang.Comes in a variety of finishes.
[Learn More About This Product]
Made from Billet Aluminum, these billet Oil Dipstick handles look and fit Great! Available in a Chrome or Silver finish. Designed to fit S197 Mustangs. All tools needed for installation are included in the kit.
[Learn More About This Product]
These Strut nut covers are designed to fit over the factory S197 Strut studs and nuts. Made in house from 6061 billet aluminum, these cover resemble little pulleys and really look cool!
[Learn More About This Product]
Steeda's brand new strut mount covers are the perfect addition to any engine bay. It's designed to fit over the top of the strut on all S197 Mustangs with stock or aftermarket fixed valve struts.
[Learn More About This Product]
Made from Billet 6061 Aluminum, these billet Oil Dipstick handles look and fit Great! Exclusive 3 piece design this is not just a cover but a complete replacement handle.
[Learn More About This Product]
Dress up your engine bay with this simple, clean looking piece. Made from Billet 6061 Aluminum, this cap is a perfect fit for the A/C check valve cap. Designed to fit the S197 Mustang.
[Learn More About This Product]
Steeda's all new billet hood strut kit is the perfect way to dress up the engine bay of your Stang. Made out of billet 6061 aluminum, they are light weight and come engraved with the Steeda name.
[Learn More About This Product]
This great looking plenum cover will clean up the looks of your Mustang GT's engine bay. Molded after the cover originally debuted on the 05 Mustang concept vehicle.
[Learn More About This Product]
Order this great looking plenum cover and clean up the looks of your Mustang GT's engine bay. Molded after the cover originally debuted on the 05 Mustang concept vehicle.
[Learn More About This Product]
These colorful and stunning valve covers replace your factory magnisuim covers. It does not take long for the factory cover to start to look weathered, stained and discolored.
[Learn More About This Product]
Upgrade the appearance under hood with a Steeda Stainless Steel Radiator Cover. Choose the brushed or polished version - each is supplied with a tube of silicon for a simple, tool-free installation!
[Learn More About This Product]
A bit of brightwork for under the hood, this enhancement lets 'em know that even down to the smallest detail, your pals at Steeda have got you covered! Installs easily onto...
[Learn More About This Product]
Step up with a billet aluminum fuse box cover with a machined finish. Polished also available. Installs easily onto your factory fuse box cover.
[Learn More About This Product]
These high quality billet oil cap covers are carved from a solid block of aluminum. Available with the Steeda or Cobra logo.
[Learn More About This Product]
This high quality billet radiator cap cover is carved from a solid block of aluminum. This stylish piece will brighten up your engine bay and enhance the look of your Stand when you show it off.
[Learn More About This Product]
This high quality billet radiator cap cover is carved from a solid block of aluminum. This stylish piece will brighten up your engine bay and enhance the look of your Stand when you show it off.
[Learn More About This Product]
This new chrome-plated cover is designed to simply slip over the cylinder portion of the throttle body housing. This cylinder portion is attached to the stock throttle body located on the driver’s side.
[Learn More About This Product]
This new chrome-plated cover is designed to simply slip over the vapor management vent solenoid. This solenoid is located on the inner driver’s side fender on a bracket attached to the..
[Learn More About This Product]
This polished stainless cover will fit all 1999-2004 Mustangs with the 16-valve engine. Ford used two different alternator brackets inside those six years and this piece fits both.
[Learn More About This Product]
Steeda's Chrome Cobra Blower Cover is the only aftermarket cover designed to fit over Steeda's popular Blower Belt Tensioner (555-3340), a very common mod on 03/04 Cobra's.
[Learn More About This Product]
With only half the weight of the stock steel parts they replace, these stylish Steeda Billet Aluminum Alternator Brackets are infinitely better looking. Save weight and dress...
[Learn More About This Product]
Made from Stainless Steel with Precise engineering to give a perfect fit, unlike other brands. Also has a Steeda exclusive prop rod holder prevents the prop rod from resting...
[Learn More About This Product]
Black plastic caps can be found on the factory air conditioning on every V8 Mustang including the Cobra models. In each case one cap in the AC line will take the larger cap cover...
[Learn More About This Product]
Steeda's billet aluminum coil covers are designed to fit your 99-04 Cobra or 4 valve motor. Made from 6061 Billet aluminum and engraved with the Steeda name and logo.
[Learn More About This Product]
Here's something to brighten up the engine bay of any Mustang with a 99-04 Cobra DOHC Engine - Ford Racing's Polished Coil Covers. Easy replacement for the factory originals...
[Learn More About This Product]
These new chrome covers slip over that big stud and nut that hold the front struts in place. A beautiful finishing touch for under the hood!
[Learn More About This Product]
This snappy, chrome cap covers the small removable cap as well as the entire top portion of the power steering reservoir and even hides the ugly attaching strap used to hold the cap in place.
[Learn More About This Product]
Our 3-part chrome cylinder-style cap covers the ugly cylinder that is part of the brake pump housing. No equipment removal required for installation.
[Learn More About This Product]
Get the "factory-custom" look with this easy to install cover. It simply slips over the original EGR valve located on top of the engine. A real stand-out on the new modular engine compartment!
[Learn More About This Product]
The fuel pressure regulator sits atop the driver side rear of the engine. Simply slide this over the top portion of the stock fuel pressure regulator for an easy dress up in seconds!
[Learn More About This Product]
This show-quality chrome cover is slotted and notched and simply slips over the original radiator reservoir bottle cap is unique to the 90-95 5.0L cars that have the sensor built in.
[Learn More About This Product]
Enhance the appearance of that dull yellow plastic power steering reservoir tube. Our chrome, two-piece cover allows easy access to the fill cap.
[Learn More About This Product]
Show-quality chrome cover simply slips over the original wiper motor, without having to remove the wiper motor from the car.
[Learn More About This Product]
This 2-piece polished stainless set covers the top surfaces of the original Ford Mustang plastic coil shield. A simple 5 minute install.
[Learn More About This Product]
Steeda's new Aluminum Radiator Hold-down Bracket replaces old rusted brackets on your 87-93 Mustang. This trick lookin' bracket weighs less than a pound and holds your radiator...
[Learn More About This Product]
This EGR Valve Pressure Sensor is located on the passenger side directly behind the passenger side strut. This new chrome cap cover simply slips over the o.e. black plastic cap.
[Learn More About This Product]
This machined-aluminum sleeve neatly covers the upper radiator hose clamp. Works with 5.0L Mustangs with factory air conditioning.
[Learn More About This Product]
Now you can easily add some show-car sparkle to the front of your engine bay with this high-qualiy stainless steel or chrome bracket kit. Kit includes 2 stainless steel or chrome...
[Learn More About This Product]
These pre-formed polished stainless hood hinge covers simply go over the factory hood hinges. Small bend-over tabs and double sided tape hold them in place.
[Learn More About This Product]
Replace those rusty-looking brackets that hold the grill opening to the front radiator support. These chrome-plated brackets come with new stainless washers and new stainless bolts.
[Learn More About This Product]
Fill that ugly opening across the top of your radiator. These Covers are notched for an easy install. Simply loosen the top radiator shroud bolts, slip the back lip of this cover...
[Learn More About This Product]
Chrome plated bracket with all new stainless hardware attaches to the driver's side firewall and holds the Barometric Sensor.
[Learn More About This Product]
This strut stud & nut cover simply threads on the portion of the studs that are exposed and cover the existing nuts on the strut alignment plates. Set of 6 nut covers.
[Learn More About This Product]
This polished windshield washer reservoir will add a classy accent to your engine bay. Great for when you are showing off your cars muscle.
[Learn More About This Product]
This new chrome cover slips over the Barometric Pressure Sensor found at the back of the engine on the firewall towards the driver's side. Nothing to remove, this simply slips on.
[Learn More About This Product]
